Microcomputer Thermoregulation Water Mattress
Specifications:
Model NO.: BH-101 Single-hot type for rehabilitation
[Normal temperature (25℃)～60℃]
Suitable for animal hospitals and rehabilitation thereof, massages, cupping, acupuncture, orthopaedic spinal, chiropractic, and other rehabilitation equipment.
Instruction manual of operating the host (main engine)
1.Place the mattress (LVC - 202 or LVC-201) on the bed or a spring bed, and then cover it with a bed cover.
2. Place the host (main engine) on a shelf which is higher than the bed, and then connect two quick joint connector made of silicon rubber to the hose (red - red) (white - white) and the mattress as well (if it is placed on a long sofa chair, a wooden bed or a tatami bed, a sheath can be added to the mattress; and by doing that, the effect will become better).
3. If the installation is completed after checking, plug in the power; and at this time, the host (main engine) will go beep from which we know that there is no water therein.
4. Open the tank lid and add activated water with small molecules of alkalescence (RO water, distilled water or clean water can also be used) to stop the beep.
5. Turn on the host’s (main engine’s) power. After the mattress is fully filled with water, the beep will cease, and then stop adding water [the host (main engine) will be full if you repeatedly fill it with water 3 to 4 times].
6. The host (main engine) fully filled with water is 4.5 liters (when being heated, it is about 4.6 liters).
7. When testing the machine, first turn on the function of detecting the warming up temperature. If the temperature has dropped down, it no longer needs to add the water.
8. Operate the host (main engine) by turning on the power button and set the temperature warming-up key (Auto 36℃). According to the individual physique, it can be manually set for the range of normal temperature (25℃)～45℃.
9. When the button for sleep is pressed, the temperature will dro 1℃ in one hour, and then it will dro 2℃ in two hours accordingly. After sleeping, the body’s resistance becomes weak; and it should not make the mattress become too hot.
Accessories
Host (main engine) Model No.: BH-101
Mattress: Model No.: LVC-202 or LVC-201
Silicone tube 2 pieces
Remote control 1 piece
Mattress sheath 1 piece
The host (main engine) can be used with sofa cushions, small mattresses, wheelchair cushions, drip bags, lumbar pad, arm pads, leg pads, and neck pad
|
Item |
Specifications |
|
Model No. |
BH-101 Single-hot type |
|
Power |
110V/220V 50Hz/60Hz |
|
Power consumption: |
350 W |
|
Host (main engine) weight |
6kg |
|
Host (main engine) dimensions |
21cm (L) X 23cm (W) X 27cm (H) |
|
Temperature setting range |
Normal temperature (25℃)～45℃ or 60℃ |
|
Mattress dimensions (LVC-201) |
50cm (L) X 70cm (W) X 1cm (H) |
TPU material: Anti-mite and anti-bacterial mattress
Use at ease without any electromagnetic waves and electric leakages.
Device for safety: When the host (main engine) dumps or has water shortage therein, it will automatically shut down.
Prevention from burn and scald: When the temperature reaches to 45℃ (113℉), the heating function will automatically stop.
Functions: Getting warm in the winter, health care at home, promoting blood circulation, improving metabolism, and relieving muscle soreness.
Cautions:
- When it is used for the disabled by setting the temperature range of 35℃~ 45℃, there should have caregivers by the side of the sick to take care of them.
